LCD Display !!! Mini W-CDMA 2100Mhz GSM Signal Booster 3G Repeater WCDMA Mobile Signal Repeater 3G Cell Phone Amplifier +Antenna
|Vendor||: Factory Outlet Repeater Store|
|Volume Retail sales||: 0 piece|
|Latest Prices||: US $38.52 / piece|
|Product Rating||: 5.0|
Dear Friend,Welcom to our store,good luck for you !
1. All the product in our shop with good quality with QC Checked Before We ship it, and normally in stock .Mix order is welcomed in our shop.
2. Order above $300 For Most of the country (Western Europ,Asia,North America), we will ship By DHL or Fedex EMS for free.(Some remote Area not included)
3. Wholesale Consumer Pls contact us For More Details before you make payment, We will reply and help u within 24 hours.
Selling point of product :
1. The new arrival of gold 2100MHz W-CDMA 3g booster
2. 200 square meters suitable (no barrier)
3. LCD display function display signal strongness which it receives from outdoor antenna
4. This is the complete product, do not need to buy any accessories, can be used after installation.
Newest FDD UMTS WCDMA 2100Mhz 3G cellular
Signal Repeater , Cell phone Signal Booster Amplifier + Outdoor Indoor Antenna
|3G-CDMA 2100Mhz Mobile Phone Signal Repeater|
| A mobile phone signal repeater provides the ultimate solution in any area where|
Cellular communications can not work well due to leak of signals,the repeater
Device features easy installation & operation ,build-in indoor antenna and no
Interferece,it could also improve indoor electromagnetism environments.
Protract cellular battery life and reduce radiation of cellphones.
A mobile phone repeater is ideal for house ,home,office use.
|Introduction to mobile phone signal repeater|
| Enhance mobile phone signal strength.|
Improve communication quality.
Reduce cellphone radiation.
Protract cellular battery life.
Economic building life.
|Display device (for reference)|
| The external power supply detecting normal display ----OK.|
Internal power supply detecting normal display ----OK.
MMIC circuit detects normal display ----OK.
-50dbm signal input and detection to achieve full displayed----OK.
| High gain ,easy installation and operation.|
Full-duplex,singal-port design,build-in power supply.
Use ALC technology ,adjust extent automatically.
Big linear power,control intermodulation & scatteration stably.
Dependability stand by GB6993-86 standard.
Compatibility of electromagnetism according with ETS300 609-4.
|Up Link||Donw Link|
|Power||-70 ~ -40dBm/FA (1.23MHz)|
|Gain||55Db ±3db||60Db ±3db|
|Max Output Power||+17dBm/ ±3DBM Total Power||+17dBm/ ±3DBM Total Power|
|Power Supply||AC 110/240V (used AC/DC Adapter 5V dc)|
|Compact Design||Indoor Use|
|Item Diemension||130 x 100 x 20mm|
|Connect Mode||N connector|
Signal coverage area :
| 1.Support Maximum coverage area is 200 square meters.|
( Depend on the area condition)
2.One indoor antenna only use for about 30-100 square meters in open space.(The indoor and outdoor antenna quality depends on the indoor signal coverage area.）
3.If want to make all use of 200 square meters which the host supports,
need to add more indoor antennas and power divider / splitter.
How Booster/Repeater Works?
Repeaters are designed to fulfill the idea of one and main principle: to fill the areas with
the weak or bad signal and to amplify these low signals in order to provide you with the
communication suitable for you.
The repeater makes the signal stronger in places with poor signal coverage such as:
1) Underground areas: basements, parking lots, tunnels;
2) Other places where cellular signal is shielded by metal or concrete walls:
offices, supermarkets, cinemas, hotels;
3) Places distant from the BTS like private houses.
Steps that describe the work of Repeater.
1) The outside antenna receives the signal from the nearest mobile base station.
2) The outside antenna sends the received signal through the coax cable to
the installed Repeater.
3) The Repeater accepts the low signal and improves it.
4) The improved signal goes to the inside antenna through the connection coax cable.
5) The inside antenna send the improved good signal to your mobile phone.
1) Fix up outdoor antenna reception on housetop
or outside the window and point it to the signal tower.
2) Connect outdoor antenna to “BTS” port in repeater machine through cable.
3) Connect indoor antenna(s) to “MOBILE’ port in repeater machine through cable also.
4) Plug power adaptor into AC power socket and finish installation.
1) If still no signal receipt after activated repeater,
please check if outdoor antenna point to signal tower
or elsewhere have strong signal and check if strength achieve -50DBM.
2) If can not call out, please adjust the direction of outdoor antenna.
3) If strength is not steady, please check if outdoor & indoor antennas are too close.
Please ensure the outdoor and indoor antennas have distance of 10 meters at least,
with a wall between and not in a same horizontal line.
To use this product to enlarge your signal, the outdoor signal shall be as good as possible.
The product will not work well if your outdoor signal is not good or bad.